Fabricated (WELDED) Product Leadtime's Fluctuate - Call or Email BEFORE you order if you need an ETA

TracTuff Overflow - App Specific Mount

$159.95

Looking for an application specific matching overflow? We've got you!

Custom machined billet tank brackets make it a snap to replace your old dingy plastic reservoir with our slick, matching overflow. A nice finishing touch to our filler necks, fill pots, and swirl pots... the overflow slides into several golden era OEM reservoir brackets (shown below). The overflow incorporates a clean vented filler cap and your choice of connection. 

NOTE: The inlet/ outlet port options listed need to be selected based on how you plan on mounting the overflow. Understand that if you are using the OEM EG/ EK/ DC2 Power Steering and the EF/ DC2/ RD1/ RD2 overflow brackets, and you choose the inlet/ outlet port to be on the base, you will need to account for the fitting "IF" the overflow is being mounted over a flat surface. If you choose the inlet/ outlet port to be on the base... I will thread a 90° fitting in and weld the bracket just above that height. Understand that this WILL increase the installed height. Add the tank height you have chosen, plus 1.355" for the billet base, billet lid, and filler cap, and space for the fitting OR choose the connection on the side of the cylinder and the overflow will be .375" above the mounting surface.

The billet brackets that make it possible to slide a fabricated overflow into the OEM steel overflow/ power steering bracket comes in two sizes. The applications listed are the only brackets I have personally confirmed to work. Honda/ Acura have made MANY different sizes over the years... they may look similar but are not the same. There may be other OEM brackets out there that will accept my billet brackets but I cannot confirm. Please do your own due diligence before assuming! Or simply buy and use one of the brackets listed, even if you don't own the application it came from, some can be used universally.


Photo Courtesy of Justin Chokov



Here are a few examples of the OEM brackets that my billet brackets are compatible with. Again, there may be other OEM brackets out there that will accept my billet bracket but I cannot confirm. Please do your own due diligence before assuming! Or simply buy and use one of the brackets listed, even if you don't own the application it came from, some can be used universally.


EG/ EK/ DC2 Power Steering - Flat Horizontal Mounting Surface

DC2 Overflow (RD1/ RD2 is very similar) Flat Horizontal Mounting Surface

EK Coolant Overflow (EG is very similar) - Specific Mounting Surface




Reviews