TracTuff Cold Air Intake

Description

1 pc. mandrel bent 3.00″ 6061-T6 aluminum intake tube with super clean lines and a look that is guaranteed to impress!

Designed to fit all EG, EK (with EG/DC2 sub frame), and DC2 chassis using Hasport mounts and either an RBC or RRC intake manifold. No modification to your vehicle and fits perfectly in the engine bay just in front of the transmission case, just to the side of the radiator, so you’re not pulling in hot air. On the duty-end of the pipe, you have a choice of either a traditional 5.00″ tall conical air filter that has a small velocity stack molded into the base/ flange OR a 5.00″ tall big-mouth air filter with a 6″ opening that mounts to a velocity stack.

Due to CARB restrictions here in California, I can no longer supply the velocity stack pictured. The price has been adjusted to reflect this, and you can source your own. The kit will include the filter, filter clamp, coupler, and coupler clamps, so you have everything you need once you purchase a velocity stack. If you are in a NON-CARB state… you can purchase the velocity stack separately, and I will have it drop shipped to you.

Due to the bracket being welded specifically for the deck height differences between the K20 or K24… there is a few days delay in shipping. You will need to be responsible for drilling a 1/2″ hole in the tube for the AIT sensor grommet (included). I stopped doing this due to complaints that the hole I drilled was not in an ideal location.

Air filter cleaning kits can be purchased directly from S&B Filters HERE.

Photo Courtesy of phoenixyellowdx