TracTuff K Series Thermostat Housing Delete

Description

The TracTuff Thermostat Housing Delete replaces the original K Series thermostat housing, thermostat, and thermostat cover for those who have switched to an electric water pump or simply removed the thermostat. Either way, no need for all the bulk.

When electric water pumps are used with the factory water pump housing, the thermostat must be removed or relocated; this simplifies that considerably. And since the thermostat has been removed, there is no need for the water bypass hose. So why keep all the bulk and unnecessary connections?

The thermostat delete has been designed and machined with a -16 ORB inlet port as high as possible on the water pump housing, eliminating any pockets where air can collect.

The hardware kit includes M6 socket head mounting bolts and an o-ring. You can choose a standard hose or a -16 male flare inlet fitting. I can also offer custom welded inlet configurations that include a section of tube if you need something special. Just send me a message through the contact page.

NOTE: I offer this part for those of you who know the consequences. Offering it… does not mean I recommend removing the thermostat, so do your research and purchase responsibly.

The Thermostat Housing Delete does not have heater or water bypass connections because an inline electric water pump would now be PUSHING water rather than sucking, rendering both connections useless.