TracTuff K Series Water Pump/ Block Port Adapter

Description

Have you ever wanted/ needed to run water to or through something? That’s what these are for. You need them because they complete a circuit, meaning you’re not taking water from a high-pressure port and trying to return that water to another high-pressure port. Why does that matter? Contrary to pictures all over the internet… you cannot route two high-pressure ports to the same accessory and expect the fluid to actually move through whatever it is that you’re trying to cool!

These adapters allow you to plumb the high-pressure (block) port to your -6 AN accessory and then route the return from that accessory to a point that actually pulls the water through, creating a complete circuit. If you are not running the OEM oil-cooled k series water pump, don’t worry… you can use my thermostat port adapter to complete the circuit. Still running heat? You’ll have to T off this connection.

Machined from US-milled 6061 aluminum. The same part fits both the block and the water pump, so order two. If you’d like to block these factory in/ out ports completely, check out my block-off version. It’s important to understand that not all blocks have a completely machined passage. It is your responsibility to confirm that your k series block has the necessary passage. If it does not… you can alternatively use my M18 or M20 adapters as a feed.

The adapter in this position would be used to feed water to something.

The adapter in this position would be used to return water from something. Alternatively, you can use my Thermostat Housing Port Adapter as a return if you do not have this style water pump.