TracTuff K24Z Rear Wheel Drive K Swap Water Neck

Description

The K24Z RWD water neck with a speed bleeder is the most cost-effective solution I offer to remove trapped air at the upper water neck.

If you haven’t already read the product description for the K24Z water neck flange, you may find it worth going back to learn how it came to be and what makes it special.

I repurpose the custom-bent tube from the K24A RWD water neck, adjust the outlet position, weld it to the unique billet flange set, and add a vent to help you remove trapped air at the highest point in the cooling system. The opposite end is also threaded, giving you the option to plug it or add an XRP -16 ORB to -10 male flare fitting so you can connect a heater core or feed an accessory. The ECT sensor port has been moved slightly from the OEM location. The hardware kit includes four M8 socket head bolts and two Genuine Honda o-rings.

NOTE: You will need at least 1.99″ of space between the firewall and the water neck mounting surface to run this!