Name: TracTuff XL Oil Filter Adapter
SKU: 37880
Availability: InStock

Description
Additional information

Description

The TracTuff XL RACE Oil Filter Adapter is a universal product designed to increase the oil filters mounting surface so you can run an XL RACE oil filter.

XL racing oil filters have been around for a long time… we just haven’t been able to run them due to the small oil filter mounting surface found on import engines. These larger higher flowing oil filters offer a few things that the OEM oil filters simply cannot. Most notably… an increase in surface area which is directly tied to its size, as well as an increase in contaminate load handling capability, and improved oil flow rates with a wider range of oils.

Race oil filters typically include the following features:

High Flow Rate and Micron Rating Options
Non-Bypass and Bypass Options
Increased Oil Pressure Handling Capability
Increased Surface Area

The adapter also has two clean oil accessory ports which can be rotated to point in whichever direction makes most sense for your application. I want to reiterate that both the 1/8″ NPT and 3/8″ NPT ports provide CLEAN OIL to an accessory of your choice. Clean oil passages are not common on adapters, sandwich plates, filter take-offs, and remote oil filter mounts. I went the extra mile to make this happen.

The CNC machined 6061-T6 aluminum body measures in at 1.290″ tall and has a 2.50″ (63.5mm) block-side o-ring which allows it to be mounted to any block that has an M22 x 1.50 female thread and a minimum of a 2.50″diameter mounting pad (pretty much describes all popular Honda engines). You can choose from TONS of quality oil filter options that use a 13/16″-16 thread, like the WIX 51069 or 51069R filter or any filter that has a gasket that falls inside the 2.875″ (ID) to 3.50″ (OD).

The hardware kit includes an overbuilt billet stainless steel M22 x 1.50 to 13/16″-16 banjo style mounting bolt (tq to 49 lb. ft.), a 1/8″ NPT and 3/8″ NPT plug, a 28.5mm (OD) x 22.5mm (ID) x 3mm and dash 119 o-ring for the mounting bolt and a dash 228 o-ring for the adapter.

NOTE: I consider this a DRAG RACE ONLY product as it really has no place on a street car but if you insistent on running a larger filter on the street or in a road race environment… I STRONGLY recommend the use of my XL Remote Oil Filter Mount.

On factory oil cooler equipped Honda motors, simply remove the large bolt that holds the OEM oil cooler in place, disconnect, and plug the two coolant lines and your done! The block will have a larger thread than the oil filter did. If this is a K… I offer a simple solution to eliminate the coolant lines. Non oil cooler equipped motors just need the oil filter mounting stud removed and the block will have a larger thread than the oil filter did.

Oil Filter Compatibility List