TracTuff Overflow – K Series Timing Cover Mount

Have a rear wheel drive k swap with a filler neck, fill pot, or swirl pot, and looking for a matching overflow with clean hose routing?

Originally requested by Aki for project RXK, this overflow mounts to the unused motor mount pad on the timing chain cover. Providing a convenient location that eliminates the need for a long hose that stretches out to the chassis, as well as covers the ugly unused mounting pad and holes.

NOTE: The tank height you have chosen is just the length/ height of the body. Please add 1.355″ for the billet base, billet lid, and filler cap to get an overall height. Overall length will be limited by how high you want the filler cap as well as how low the cylinder can go before it hits your belt, the way you’ve routed it, so be prepared to measure and share the details. If you need the inlet/ outlet port anywhere other than the bottom, you can email me after your purchase. If you do not communicate the position of the tank, I will automatically weld it so it sits as high as it can. It is the customers responsibility to research the internal volume of their choice. Purchasing this product is confirmation that the choice made will work for your application. Overflows that over flow when called to action are your problem.