TracTuff Remote Mount Fill Pot – Dual Entry

$239.95

Fabricated - See Banner at Top of Page for Approx. ETA

Fabricated Product

Dates are not held until paid. If you need an exact date, please inquire just before placing an order. The job date is also the ship date.

Tank Diameter
Tank Length
Inlet Connections
Outlet Connection
Thermostat Water Bypass

Only Required When Thermostat is Used

ECT Sensor Bung
Categories: ,
TracTuff Remote Mount Fill Pot - Dual Entry
TracTuff Remote Mount Fill Pot - Dual Entry - Image 2
TracTuff Remote Mount Fill Pot - Dual Entry - Image 3

Description

The J Series water neck is more complicated than most, due to the engine having a pair of cylinder heads and therefore two water outlets. My billet water neck greatly reduces clutter but complicates the plumbing, so I made this Remote Coolant Fill Pot to not only merge the two outlets but also give owners a place to fill the system.

Find a place to mount this or let the plumbing support it. Run two lines from my billet water neck to the two inlets on the fill pot, extend the ECT wires, and you’re done. Extremely flexible in congested engine compartments.

NOTE: If you are interested in a specific design that varies from this, please email me at sales@tractuff.com. The cap bung has a 1/16″ NPT port for connection to an overflow and uses early model Honda radiator caps, such as an 88′-91′ Civic/ CRX or 90′-93′ Integra.

Additional information

Weight 2 lbs
Dimensions 10 × 8 × 8 in

Related products