TracTuff M20 to -10 Male Flare
The TracTuff M20 x 1.0 to -6 male flare is typically used to plumb a coolant to a small accessory, such as a turbo or waste gate.
The M20 x 1.0 thread is common on a number of cylinder heads... you can use this on the the right rear corner of the k series PRB/ PRC/ PPA/ and PPL cylinder heads, under the VTEC Spool Valve on VTEC B and H cylinder heads, under the distributer on SOHC D, SOHC F and non-VTEC B cylinder heads. Also offered in -10 and -12 male flare variants.
NOTE: The M20 x 1.0 thread does not seal on its own; I recommend Loctite 5452 as a fast cure thread sealant or Loctite 561 if you have 24 hrs. to cure. Loctite 561 may be more readily available but is my last recommendation. All must be applied thoroughly into the threads.