TracTuff Remote Oil Filter Block Adapter

The TracTuff Remote Oil Filter Block Adapter is a universal product designed to relocate the oil filter to a more convenient location.

The block adapter is machined with -10 ORB inlet/outlet ports that are marketed “IN” & “OUT”  and a filtered 3/8" NPT accessory port to add a sensor or supply clean oil to an accessory of your choice. I want to reiterate that the 3/8" NPT ports provide CLEAN OIL to an accessory of your choice... something that is not very common!

The CNC machined 6061-T6 aluminum body measures in at 1.42" tall (1.89" including the bolt head), uses a 2.50" (63.5mm) o-ring/ gasket OD, and can be mounted to anything that has a M22 x 1.50 female thread and a 2.50" mounting pad; pretty much all popular Honda engines once the stud is removed. The block adapter can be rotated to point in any direction and once tightened (tq to 49 lb. ft.) can be safety wired using the machined features on the bolt and body! 

NOTE: If you don't already have an oil filter mount... I have an equally well thought out solution, please be sure to check it out. If you are choosing NOT to buy the port fittings... please be sure to purchase fittings that have max hex size of 1.15" or they wont work or will need to be turned down. I also highly suggest the use of a one-way check-valve on the plumbing of the "Out" line as close to the source as possible.

On factory oil cooler equipped motors, simply remove the large bolt that holds the OEM oil cooler in place, disconnect, and plug the two coolant lines and your done! If this is for a K... I offer a simple solution to eliminate the coolant lines. Non oil cooler equipped motors just need the stud removed and the block.